Viewing The Amount Of Memory; Adding / Replacing A Memory Module - Sony VAIO VGC-M1 Series Hardware Manual

Hardware Guide

Viewing the amount of memory

To view the amount of memory, proceed as follows:
1
Turn on the computer.
2 Click the Start button, point to All Programs, Security & Utilities, then VAIO System Information, and click VAIO System
Information again.
You can view the amount of installed memory here.

Adding / replacing a memory module

If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your dealer.
To add or change a memory module, proceed as follows:
1
Shut down the computer, unplug it, and remove any peripheral devices.
2 Wait for the computer to cool down.
The inside of the main unit becomes very hot during operation. Wait for about one hour for the computer to cool down before
opening the unit.
3 With the main unit's back panel facing you, push the two buttons at the rear at the same time to open the cover, as shown.
n N
41
Upgrading your VAIO computer