Connecting A Universal Serial Bus (Usb) Device - Sony VAIO VGC-M1 Series Hardware Manual

Hardware Guide
Using your computer as a TV
You can use your computer as a TV.
To be able to watch TV, proceed as follows;
1 Connect one end of the antenna cable to the RF-in (antenna) connector on your computer.
2
Connector the other end of this cable to the wall socket.
Depending on the type of wall socket, you need to buy a different splitter.

Connecting a Universal Serial Bus (USB) device

You can connect a USB device such as a scanner, a floppy disk drive or a printer, to your VAIO desktop.
To connect a USB device, simply plug in the USB cable of the device into one of the
❑
USB devices are hot plug and play devices. You do not need to shut down your computer prior to connecting these devices
unless the manual supplied with the device states otherwise.
❑
For some USB devices you need to install the software before you connect the device. Not following this procedure might cause
the device not to work properly. For more information, check the manual provided with the USB device.
Connecting peripheral devices
ports on your computer.
n N
33