Troubleshooting - Breville THE SMART OVEN BOV800XL /A Instruction Booklet

TROUBLESHOOTING

pOSSIBLE pROBLEM EASY SOLUTION
• Check that the power plug is securely inserted
into the outlet
Oven will not switch
• Insert the power plug into an independent outlet
"ON"
• Insert the power plug into a different outlet
• Reset the circuit breaker if necessary
• The oven will remember the last setting used for
each function unless you remove the plug from
I would like to have
the wall outlet.
the oven LCD default
• To restore the oven's default settings for each
settings back
function, remove the plug from the wall outlet.
Wait 5 seconds, then plug back in.
• The oven goes into standby mode if not used
for 10 minutes. When in standby mode, the LCD
screen will cease to illuminate, however all
function options will still be visible.
The LCD display light
has gone out
• To re-activate the oven out of standby mode,
press the START/CANCEL button on the control
panel, or turn any dial. The LCD screen will
re-illuminate.
• Some large pizzas may brown unevenly in
The pizza does not compact ovens. Open the oven door half way
cook evenly through the cooking time and turn the pizza 90
degrees for more even browning.
The Magnetic • Always open the door slowly and in a controlled
Auto-Rack Eject comes manner when the wire rack is inserted into this
out too far when I open rack height position to prevent the wire rack from
the door ejecting too quickly.
• The FROZEN FOODS button is only selectable
I cannot select the
during the TOAST, BAGEL, PIZZA and COOKIE
FROZEN FOODS button
functions.
Steam is coming out • This is normal. The door is vented to release
from the top of the steam created from high-moisture content foods
oven door such as frozen breads.
48
TROUBLESHOOTING
pOSSIBLE pROBLEM EASY SOLUTION
• Element IQ™ accurately controls the heat inside
The heating elements
the oven by pulsing the power in the heating
appear to be pulsing
elements in short bursts. This is normal.
• This is normal. The condensation created from
Water is dripping onto
high moisture content foods such as frozen
benchtop from under
breads will run down the inside of the door and
door
can drip onto the bench.
• The LCD screen will display 'E01' when there is
a non-resettable issue with the appliance. Should
The LCD screen
this this occur, immediately remove the power
displays 'E01'
cord from the wall outlet and call the Breville
Customer Service Center (1-866-BREVILLE).
• The LCD screen will display 'E02' when there is
a non-resettable issue with the appliance. Should
The LCD screen
this this occur, immediately remove the power
displays 'E02'
cord from the wall outlet and call the Breville
Customer Service Center (1-866-BREVILLE).
• The LCD screen will display 'E03' if the oven
temperature is above the set maximum limit.
Remove the plug from the wall outlet, allow the
The LCD screen
oven to cool for 15 minutes, then plug back in.
displays 'E03'
• Call Breville Customer Service (1-866-BREVILLE)
if the 'E03' message continues.
• The LCD screen will display 'E04' if the room
The LCD screen
temperature is below the set minimum. Unplug
displays 'E04'
the oven and relocate to to a warmer area.
• The LCD screen will display 'E05' when there is a
non-resettable issue with the appliance. Should
The LCD screen
this occur, immediately remove the power cord
displays 'E05'
from the wall outlet and call the Breville Customer
Service Center (1-866-BREVILLE)
49