Makita VC002GL Instruction Manual page 22

Pipes (with an optional stopper installed) can be placed
into the pipe holder when not using the cleaner for a
short time.
2
Fig.41
► 1. Stopper (optional accessory) 2. Pipe holder
A hose can be wrapped and stored around the housing
or handle of the cleaner in large loops. Connect its both
ends together to make loops and hook the loops onto
the handle raised up. Alternatively, keep its root end
installed in the hose inlet and hang the loops on the
multi hook with the loose end tied up.
Fig.42
Fig.43
Cleaning of powder filter (HEPA) and
prefilter
Clean out the powder filter, prefilter and damper at
regular intervals since clogged filters and damper may
result in poor suction performance.
Routinely wipe and shake dust off filters and damper by hand.
Fig.44
1
► 1. Prefilter
Fig.45
► 1. Damper 2. Powder filter (HEPA)
Occasionally wash the powder filter in water, rinse and dry thoroughly
in the shade before use. Never wash filters in a washing machine.
Fig.46
22 ENGLISH
2
1
1