Maintenance - Makita VC001GL Instruction Manual

Adjusting lengths of slide-type
extension wand
Optional accessory
A slide-type extension wand can be combined for
shorter and longer lengths. It allows to clean hard-to-
reach areas and comfortable positioning options.
Pull in and out the slide pipe to change wand lengths
while pressing and holding the slide button.
Release the slide button to lock the slide pipe in your desired position.
Fig.29
► 1. Slide pipe 2. Slide button

MAINTENANCE

CAUTION:
Always be sure that the appliance is
switched off and the battery cartridges are removed
before attempting to perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Storage of accessories
Accessories and attachments not in use, such as noz-
zles and brushes, can be hooked and stored in the multi
hook at the rear of the cleaner.
2
Fig.30
► 1. Multi hook 2. Accessories and attachments not in use
2
1
2
1
Pipes (with an optional stopper installed) can be placed
into the pipe holder when not using the cleaner for a
short time.
2
Fig.31
► 1. Stopper (optional accessory) 2. Pipe holder
A hose can be wrapped and stored around the housing
or handle of the cleaner in large loops. Connect its both
ends together to make loops and hook the loops onto
the handle raised up. Alternatively, keep its root end
installed in the hose inlet and hang the loops on the
multi hook with the loose end tied up.
Fig.32
Fig.33
15 ENGLISH
1