Vigor2866Ac / Vigor2866 Ax / Vigor2866Lac - Draytek Vigor2866 Series Quick Start Manual

2 . 2 V i g o r 2 8
2 . 2 V i g o r 2 8
No. LED
(1)
ACT
WAN2
QoS
USB
LTE
DSL
WCF
2.4G/5G
6 6 a c / V i g o r 2
6 6 a c / V i g o r 2
Status
Off The router is powered off.
Blinking The router is powered on and running normally.
On Internet connection is ready.
Off Internet connection is not ready.
Blinking The data is transmitting.
On The QoS function is active.
Off The QoS function is inactive.
On USB device is connected and ready for use.
Off No USB device is connected.
Blinking The data is transmitting.
On LTE device is connected and ready for use.
LTE device is not detected, or has serious
Off problem (e.g., no SIM card, SIM pin error, SIM
deactivated, and etc.).
Slowly: LTE device is in dialing up.
Blinking
Quickly: The data is transmitting.
The router is ready to access Internet through
On
DSL link.
Slowly: The DSL connection is ready.
Blinking
Quickly: The connection is training.
The Web Content Filter is active. (It is enabled
On
from Firewall >> General Setup).
Off WCF is disabled.
2.4G/5G: Wireless access point with
bandwidth of 2.4GHz/5GHz is ready.
On
8 6 6 a x / V i g o r
8 6 6 a x / V i g o r
Explanation
4
2 8 6 6 L a c
2 8 6 6 L a c