ABB XFC6200EX Startup Manual page 19

Visual Alarm & Status Codes

After the 6200EX completes recording Log Period flow and operational

records, the LCD will show any alarm conditions that have occurred.

Also, the date, hour and type of alarm conditions are stored in the

6200EX's memory. Status codes are also displayed when the conditions

exist. An alarm or status code can be a character, letter or symbol. The

alarm and status codes shown in Table 3 will appear on the lower right

side of the LCD screen (see Fig. 13 below). Descriptions of each code

are described in Table 3.

Note: Applications in a 6200EX device can be assigned to any

annunciator. To verify the current assignments, see Annunciators

under Display in PCCU32's Entry Mode. (See Figure 14)

Figure 13 (Annunciator Locations)

Figure 14 (Annunciator Assignments)

Table of Contents