Honeywell Notifier FAAST LT NFXI-ASD Series Quick Installation Manual page 10

Click Next and follow the on-screen instructions.
Unless changed, the install wizard will create and store files at the
following locations:
When installation is complete, the wizard will
automatically create a shortcut icon on the PC
desktop.
It will be necessary to re-boot the PC in order to
run PipeIQLT.
Launching
To launch the PipeIQLT application, double click the PipeIQLT icon
on the desktop.
Or
click Start (bottom left corner of the Windows screen) and then
select PipeIQLT from the programs list.
When the application opens, it is possible to start a new project, or
to monitor or modify an existing project. Use the File menu to select
New or Open. Choose from the Pipe Design, Configuration or
Monitoring tabs to enter the required mode.
Set the detector to Maintenance mode. To communicate with
a FAAST LT detector, connect the USB port to a PC with an
appropriate cable.
N200-102-00
Notifier Ltd., Charles Avenue, Burgess Hill, West Sussex, RH15 9UF, UK
Quitting
Exiting the program closes the application completely.
To quit the PipeIQLT application, click X in the upper-right corner
of the window.
Or click Exit from the File menu.
PipeIQLT can be uninstalled from the computer in the normal way
for your operating system.
NFXI-ASD11: 0832-CPD-2135 13
NFXI-ASD12: 0832-CPD-2136 13
NFXI-ASD22: 0832-CPD-2137 13
Aspirating Smoke Detectors
Pittway Tecnologica S.r.l.
10
0832
EN54-20 : 2006
Class A B & C
Via Caboto 19/3,
34147 Trieste, Italy
I56-3947-200