Appendix; Replacing The Date Battery - Canon Power Shot A400 User Manual

Appendix

Replacing the Date Battery

If the LCD monitor displays the Date/Time
menu when you turn on the camera, this
means that the date battery has run down
and the clock has stopped running. Please
purchase a replacement battery (battery type
CR1220) and install it as follows.
The date battery is preinstalled at the
factory and may therefore expire earlier
than its rated lifespan after the camera
has been purchased.
Be particularly careful to keep the date
batteries out of the reach of children. Seek
medical assistance immediately if a child
swallows a battery since corrosive battery
fluids could damage the stomach or
intestinal wall.
1
Be sure that the camera is turned
off.
120
2
Open the SD card slot/battery
cover (p. 13, 15) and remove the
battery holder.
3
Pull out the battery in the
direction as shown with arrow.
(-) Negative end
4
Insert the new date battery into the
holder with the negative end (-)
facing up.