List Of Messages - Canon Power Shot A400 User Manual

List of Messages

The following table explains each of the messages that may appear on the LCD monitor.
For messages which may appear when a printer is connected, refer to the Direct Print User
Guide.
Busy...
No memory card
Card locked!
Cannot record!
Memory card error!
Memory card full
Naming error!
Change the batteries
No image
Image too large
Incompatible JPEG
format
112
The camera is recording image data to the SD card.
The playback mode is running.
You attempted to shoot or play back with no SD card installed.
The SD card is write-protected.
You attempted to shoot with no SD card installed.
There is something wrong with the SD card.
SD card is too full to accommodate more images or print settings.
The file could not be created because there is a file with the same name as
the directory that the camera is attempting to create, or the highest possible
file number has already been reached. In the Set up Menu, set the File Reset
option to [On]. Save all the images you wish to retain onto a computer, then
reformat the SD card. Please note that formatting will erase all the existing
images and other data.
Battery charge is insufficient to operate the camera. Replace both batteries at the
same time with new AA-size alkaline batteries (p. 17) or fully recharged Canon
NiMH batteries.
No images recorded on SD card.
You attempted to play back an image larger than 4064×3048 pixels or with a
large file size.
You attempted to play back an incompatible JPEG file.