Advertisement
34. Align mounting holes of cyclone funnel and
cyclone funnel adapter then attach with (4)
⁄
"-16 x 1" hex bolts, (8)
3
8
and (4)
⁄
"-16 lock nuts (see Figure 27).
3
8
Cyclone
Funnel
x 4
Figure 27. Cyclone funnel attached to adapter.
35. Remove collection drum from under lid, and
secure hex bolts from Step 30 with (2)
lock nuts.
IMPORTANT: DO NOT overtighten. Only
tighten lock nuts until they are flush with bot-
tom of hex bolts.
36. Move collection drum back under lid.
37. Connect bottom of cyclone funnel to collec-
tion drum lid with 9" flexible hose and (2) 9"
hose clamps (see Figure 28).
Figure 28. Cyclone funnel connected to drum lid
with flexible hose (stand removed for clarity).
-10-
⁄
" thin flat washers,
3
8
Cyclone
Funnel
Adapter
⁄
"-16
3
8
Cyclone
Funnel
Drum Lid
38. Attach handle hook base to lower stand
brace above handle with (2)
bolts, (4)
⁄
" flat washers, and (2)
3
8
nuts (see Figure 29).
Handle Hook Bracket
x 2
Figure 29. Handle hook bracket attached to
lower stand brace.
39. Attach handle hook to base with (1)
1" hex bolt, (2)
⁄
" flat washers, and (1)
3
8
lock nut (see Figure 30).
Note: Do not tighten nut completely to allow
hook to move.
Handle Hook
Bracket
Figure 30. Handle hook attached to hook
bracket.
40. Connect vacuum hose to collection drum
vacuum port with (1) 1
Figure 31).
Figure 31. Connecting vacuum hose.
Model H7509Z (Mfd. Since 01/21)
⁄
"-16 x 1" hex
3
8
⁄
"-16 lock
3
8
Lower Stand Brace
⁄
"-16 x
3
8
⁄
"-16
3
8
Handle Hook
⁄
" hose clamp (see
1
4
Advertisement
