Configure Wpa/Wpa2 Enterprise - D-Link DAP-1360L User Manual

Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on Setup and then click Wireless.Settings on the left side.
2. Next to Security Mode, select Enable. W PA. W ireless.Security, Enable.
WPA2.Wireless.Security, or Enable.WPA2-Auto.Wireless.Security.
3. Next to Cipher Mode, select TKIP, AES, or Auto.
4. Next to Personal / Enterprise, select Enterprise.
5. Next to RADIUS Server, enter the IP Address of your RADIUS server.
6. Next to Port, enter the port you are using with your RADIUS server.
1812 is the default port.
7. Next to Shared Secret, enter the security key.
8. Click Save.Settings to save your settings.
D-Link DAP-1360L User Manual

Configure WPA/WPA2 Enterprise

73