Configure Wpa/Wpa2 Enterprise - D-Link DAP-1260L User Manual

Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the access point (dlinkap.local). Click
on Setup and then click Wireless.Setup on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto(WPA.or.WPA2),.WPA2.only,.or WPA.
only.
4. Next to Cipher Mode, select TKIP, AES, or Auto.
5. Next to RADIUS Server IP Address, enter the IP Address of your RADIUS
server.
6. Next to RADIUS Server Port, enter the port you are using with your
RADIUS server. 1812 is the default port.
7. Next to RADIUS Server Shared Secret, enter the security key.
8. Click Advanced to enter settings for a secondary RADIUS Server.
9. Click Save.Settings to save your settings.
D-Link DAP-1260L User Manual

Configure WPA/WPA2 Enterprise

68