Table of Contents
Advertisement
Use the WPS Wizard for WiFi Connections
The WPS Wizard helps you add a WPS-enabled device to your WiFi network without typing the WiFi
password.
To use the WPS Wizard:
1.
Launch a web browser from a computer or mobile device that is connected to the network.
2.
Type http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
5.
Click the Next button.
The WPS page displays.
6.
Select a setup method:
•
Push button. Click the WPS button on this screen.
•
PIN Number. The page adjusts. Enter the client security PIN and click the Next button.
7.
Within two minutes, go to the WPS-enabled device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up yourr WPS-enabled device with the network password when
it connects. The router WPS page displays a confirmation message.
Specify Basic WiFi Settings
The router comes with preset security. This means that the WiFi network name (SSID), network key
(password), and security option (encryption protocol) are preset in the factory. You can find the preset SSID
and password on the label on the router.
Note
The preset SSID and password are uniquely generated for every device to protect
and maximize your WiFi security.
If you change your preset security settings, make a note of the new settings and store it in a safe place
where you can easily find it.
If your computer is connected with WiFi when you change the SSID or other WiFi security settings, you are
disconnected when you click the Apply button. To avoid this problem, use a computer with a wired connection
to access the router.
Nighthawk X6S AC4000 Tri-Band WiFi Router
Network Settings
55
Advertisement
Table of Contents
