Table of Contents
Advertisement
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > VPN Service.
The VNP page displays.
5.
Select the Enable VPN Service radio button.
6.
Scroll down to the Clients will use this VPN connection to access section, and select the Home Network
only radio button.
This is the default setting. The VPN connection is only to your home network, not to the Internet service
for your home network.
7.
Click the Apply button.
Your settings are saved.
8.
Click For Windows or For Non Windows button and download the configuration files for your VPN
clients.
9.
Unzip the configuration files and copy them to the folder where the VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
files\OpenVPN\config\
Use a VPN Tunnel to Access Your Internet Service at Home
To access your Internet service:
1.
Set up the router to allow VPN access to your Internet service.
See
Set Up VPN Client Internet Access in the Router
2.
On your computer, launch the OpenVPN application.
The OpenVPN icon displays in the Windows taskbar.
3.
Right-click the icon and select Connect.
4.
When the VPN connection is established, launch your Internet browser.
Nighthawk X6S AC4000 Tri-Band WiFi Router
by default.
Use VPN to Access Your Network
on page 121.
122
C:\Program
Advertisement
Table of Contents
