Model RPS-1000 Installation Manual
spacing in accordance with NFPA 72.
Manufacturer
Asco
T8210A107
8210G207
3.5.2.1 Class B Notification Wiring
You must use an appliance from the list of compatible appliances in the Appendix A.
To install a Class B notification appliance circuit:
1. Wire Class B Notification appliances as shown in Figure 3-8.
2. Configure the circuit through programming.
Figure 3-8 Class B Notification Appliance Circuit Wiring
3.5.2.2 Class A Notification Wiring
You must use an appliance from the list of compatible appliances in the Appendix A at
the back of this manual.
To install a Class A notification appliance circuit:
1. Wire the Class A notification appliances as shown in Figure 3-9.
Table 3-1: Approved Releasing Solenoids
Part Number
UL Listed EOL
Model 7628
4.7 k
3-7
Rating
Current
24 VDC
3A max
24 VDC
3A max
Alarm
Polarity
Notification Wiring
Supervised
Power Limited
Regulated
151153
Freq
0 Hz
0 Hz