AEG FSS53637Z User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSS53637Z
  6. User manual
AEG FSS53637Z User Manual

AEG FSS53637Z User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FSS53637Z
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSS53637Z

Summary of Contents for AEG FSS53637Z

  • Page 1 FSS53637Z User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
  • Page 5 ENGLISH 2.4 Use cable. Should the mains cable need to be replaced, this must be carried out • Do not put flammable products or by our Authorised Service Centre. items that are wet with flammable • Connect the mains plug to the mains products in, near or on the appliance.

  • Page 6: Product Description

    2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply.

  • Page 7: Control Panel

    ENGLISH • When the appliance has a When AirDry is activated malfunction, the red light flashes. during the drying phase, the Beam-on-Floor is off when projection on the floor may the appliance is deactivated. not be completely visible. To see if the cycle is finished, check the control panel.

  • Page 8: Programme Selection

    Indicator Description Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". Drying phase indicator. It is on when you select a programme with the dry‐...
  • Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry Crockery, Fresh, lightly • Dishwashing 60 °C •...

  • Page 10: Basic Settings

    Water (l) Energy (kWh) Duration (min) 1) 2) Programme 9.3 - 11.4 0.82 - 0.94 1h 30min 9.1 - 11.1 1.01 - 1.13 2h 40min 9.2 - 11.2 0.96 - 1.08 0.835 AUTO Sense 8.2 - 11.2 0.67 - 1.08...
  • Page 11 ENGLISH How to change a setting You can change the basic settings in setting mode. Make sure the appliance is in setting When the appliance is in setting mode, mode. the bars of the ECOMETER represent 1. Use Previous or Next to select the available settings.
  • Page 12 Water hardness German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
  • Page 13 ENGLISH in the same cycle or at the beginning of Acoustic signals sound also the next programme. This activity when a malfunction of the increases the total water consumption of appliance occurs. It is not a programme by additional 4 litres and possible to deactivate these the total energy consumption of a signals.

  • Page 14: Before First Use

    6.6 Key tones The latest programme that was completed before the appliance The buttons on the control panel make a deactivation is saved. It is then selected click sound when you press them. You automatically after you activate the can deactivate this sound.

  • Page 15: Daily Use

    ENGLISH 7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
  • Page 16 • The ECOMETER indicates the The appliance senses the type of load level of energy and water and adjusts a suitable wash cycle. consumption. During the cycle, the sensors operate • The display shows the several times and the initial program programme duration.

  • Page 17: Hints And Tips

    ENGLISH door, the appliance continues from the • When the programme is completed. point of interruption. • After 5 minutes if a programme was not started. If the door is opened for more than 30 seconds 8.10 End of the programme during the drying phase, the running programme ends.
  • Page 18 • The arrangement of the items in the results and hard-water filming or baskets is correct. spotting on the items. Using too much • The programme is suitable to the type detergent with soft or softened water of load and the degree of soil.

  • Page 19: Care And Cleaning

    ENGLISH 10. CARE AND CLEANING • Do not use abrasive products, WARNING! abrasive cleaning pads, sharp tools, Before any maintenance strong chemicals, scourer or solvents. other than running the • Wipe clean the door, including the programme Machine Care, rubber gasket, once a week. deactivate the appliance and •...
  • Page 20 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.

  • Page 21: Troubleshooting

    ENGLISH 10.6 Cleaning the lower spray 3. To install the spray arm back, press it downwards. We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards.
  • Page 22 Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
  • Page 24 The PNC can be found on the rating WARNING! plate on the appliance door. You can We do not recommend using also check the PNC on the control panel. the appliance until the Before checking the PNC, make sure the problem has been appliance is in the programme selection.
  • Page 25 ENGLISH Problem Possible cause and solution Unusual foam during washing. • Use the detergent designed specifically for dishwash‐ ers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. •...

  • Page 26: Technical Information

    12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 10 (1.0) Water supply max 60 °C...
  • Page 28 www.aeg.com/shop...

Table of Contents