Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker KFBEG110
Summary of Contents for Black & Decker KFBEG110
- Page 1 KFBEG110 KFBEG125 www.blackanddecker.co.uk...
-
Page 4: Intended Use
Intended use protected supply. Use of an RCD reduces the risk of electric shock. Your BLACK+DECKER KFBEG110, KFBEG125 angle grinders have been designed for grinding and cutting metal 3. Personal safety and masonry using the appropriate type of cutting or grinding a. - Page 5 (Original instructions) ENGLISH e. Maintain power tools. Check for misalignment or Do not use a damaged accessory. Before each use binding of moving parts, breakage of parts and any inspect the accessory such as abrasive wheels for other condition that may affect the power tools chips and cracks, backing pad for cracks, tear or operation.
-
Page 6: Kickback And Related Warnings
ENGLISH (Original instructions) Do not use accessories that require liquid coolants. The grinding surface of centre depressed wheels Using water or other liquid coolants may result in must be mounted below the plane of the guard lip. An electrocution or shock. improperly mounted wheel that projects through the plane Note: The above warning does not apply for power tools of the guard lip cannot be adequately protected. -
Page 7: Safety Of Others
(Original instructions) ENGLISH Vibration Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding The declared vibration emission values stated in the technical wheel may cut gas or water pipes, electrical wiring or data and the declaration of conformity have been measured objects that can cause kickback. - Page 8 ENGLISH (Original instructions) Features Place the disc (10) onto the spindle (4) as shown (fig. B). If the disc has a raised centre (11), make sure that the This tool includes some or all of the following features. raised centre faces the inner flange. 1.
- Page 9 (Original instructions) ENGLISH wheel breakage. Edge grinding wheels are not designed material removal. Move to a medium grit paper and finish with to withstand side pressures caused by bending. a fine grit disc for optimal finish. Remove the tool from the work surface before turning the Coarse = 16 - 30 grit.
- Page 10 ENGLISH (Original instructions) Mounting and using cutting (type 41) wheels All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the duration of the sanding Cutting wheels include diamond wheels and abrasive discs. project. Vacuum filter bags should be changed Abrasive cutting wheels for metal and concrete use are frequently.
-
Page 11: Maintenance
(Original instructions) ENGLISH Once a cut is begun and a notch is established in the Safely dispose of the old plug. workpiece, do not change the angle of the cut. Changing Connect the brown lead to the live terminal in the new the angle will cause the wheel to bend and may cause plug. -
Page 12: Protecting The Environment
Please recycle electrical products and batteries according to local provisions. Further information is available at www.2helpU.com Backing flange Backing flange Technical data KFBEG125 Type 1 KFBEG110 Type 1 Input voltage Power input Abrasive cutting wheel Diamond cutting wheel Rated speed 12000... -
Page 13: Ec Declaration Of Conformity
(Original instructions) ENGLISH EC declaration of conformity MACHINERY DIRECTIVE KFBEG110, KFBEG125 Angle grinder Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN 60745-1:2009 + A11:2010; EN 60745-2-3:2011 + A2:2013 + A11:2014 + A12:2014 + A13:2015 These products also comply with Directive 2014/30/EU and 2011/65/EU. - Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...