MA lighting grandMA3 Quick Start
Hide thumbs
Also See for grandMA3:
- Quick manual (106 pages) ,
- Installation manual (6 pages) ,
- Quick start (5 pages)
Related Manuals for MA lighting grandMA3
Summary of Contents for MA lighting grandMA3
- Page 1 Quick Start 1. Master section 2. Dual encoder section 3. Power key 4. Command section 5. Level wheel 6. Executor buttons 1&2 7. Executor faders 8. Executor buttons 3&4 9. Executor knobs Connect and Power Up the Device 1. Unpack the device.
- Page 2 Do not press the power key to turn off the device. Only if a hard shutdown is necessary, press and hold the power key for more than 3 seconds. To turn off the grandMA3 onPC command wing XT: -Tap the icon at the top of the control bar to begin the shutdown procedure for the console or the onPC application or shutdown the onPC software by the shutdown keyword .
- Page 3 Do not switch off the grandMA3 onPC command wing XT too early. Make sure that you wait until Windows has completely shutdown. All LEDs on the grandMA3 onPC command wing XT must have turned off. -Set the power switch to position O .
- Page 4 Independent of the devices connected to the grandMA3 onPC software, the number of parameters can only reach a maximum of 4 096. For more information see: Expand the Amount of Parameters topic. To learn more about the update process, read the Update grandMA3 onPC windows hardware topic in the online user manual.