Operation - Makita DUC122 Instruction Manual

CAUTION:
• For a while after a new saw chain is installed, it
tends to become loosened. From time to time
check the saw chain tension before use.
• Low tension of saw chain may cause coming out
of place.
• Installing or removing saw chain should be
carried out in a clean place free from sawdust
and the like.

OPERATION

Lubrication
1
► 1 . Oil tank cap 2. Oil inspection window 3. Oil tank
opening
Saw chain is automatically lubricated when the tool is
in operation.
Check the amount of remaining oil in the oil tank
through the oil inspection window.
To refill the tank, remove the cap from the oil tank
opening.
After refilling the tank, always screw the provided oil
tank cap on the chain saw.
CAUTION:
• Do not operate the chain saw when the tank is
empty. Replenish the oil in due time before the
tank is empty.
• When filling the chain saw with chain oil for the
first time, or refilling the tank after it has been
completely emptied, add oil up to the bottom
edge of the filler neck. The oil delivery may
otherwise be impaired.
• As a saw chain oil, use oil exclusively for Makita
chain saws or oil available in market.
• Never use oil including dust and particles or
volatile oil.
• When pruning trees, use botanical oil. Mineral
oil may harm trees.
• Never force the chain saw when pruning trees.
• Before cutting out, make sure that the provided
oil tank cap is screwed in place.
Hold the chain saw away from the tree. Start it and wait
until lubrication on saw chain is adequate.
Bring the tip guide/lower guide into contact with the
branch to be cut before switching on. Cutting without
bringing the tip guide/lower guide into contact with the
branch may cause the guide bar to wobble, resulting in
injury to operator.
Saw the wood to be cut by just moving it down.
12 ENGLISH
2
3