Audio Settings - Sony STR-DA5500ES Operating Instructions Manual

Party Setup
Lets you select the zone which plays back the
same music as the main zone when you press
the PARTY button to start the party mode.
x ZONE2+ZONE3
x ZONE2
x ZONE3
138
GB

Audio settings

You can make settings for the audio to suit
your preference.
Digital Legato Linear (D.L.L.)
When you set this setting to "AUTO," the
receiver plays back the sound recorded using
lossy compression with high quality sound. If
the CD sound is recorded using Linear PCM,
the CD sound quality level will be increased
further.
x OFF
x AUTO
Note
D.L.L. is available for LPCM 44.1 kHz, Dolby
Digital, DTS, or analog signals.
A/V Sync (Synchronizes audio
and video output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
x HDMI AUTO
The time gap between audio output and visual
display for the monitor connected via an
HDMI connection will be adjusted
automatically based on the information for the
TV. This feature is available only when the
monitor supports the A/V Sync function.
x 0 ms – 300 ms
You can adjust the delay from 0 ms to 300 ms
in 10 ms steps.
Notes
• This function is useful when you use a large LCD
or plasma monitor or a projector.
• This function does not work in the following cases.
– The multi-channel input is selected.
– "2ch Analog Direct" is being used.