Switching The Zone Setting Of The Remote; Operating The Receiver From Another Zone (Zone 2/Zone 3 Operations) - Sony STR-DA5500ES Operating Instructions Manual

Switching the zone
setting of the remote
The remote commander is initially set to be
used in zone 2. If you want to use it in zone 3,
switch the zone setting of the remote.
RM SET
UP
SHIFT
1
Press ?/1 while pressing RM
SET UP.
The AMP and ZONE buttons flash.
2
Press ZONE.
The AMP button goes off, the ZONE
button keeps flashing and the SHIFT
button lights up.
3
Press the numeric button 2 for
the zone 2, or 3 for the zone 3
while the ZONE button is
flashing.
The ZONE button lights up.
4
Press ENT/MEM.
The ZONE button flashes twice and the
remote switches to zone 2 or zone 3
mode.
Operating the receiver
from another zone
(ZONE 2/ZONE 3 operations)
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
?/1
repeater is not connected, use this receiver in
the main zone.
AMP
ZONE
ZONE
2, 3
SHIFT
Input
ENT/
buttons
MEM
SOURCE
MASTER
VOL
1
Turn on the main receiver (this
receiver) and the amplifier in
zone 2 or zone 3.
?/1
continued
109 GB