Honeywell E-Mon E10039 Installation And Setup Manual page 27

43. Open the Configurator utility to confirm IP address and Status is Locked Fixed.
44. Be sure to change your PC back to its original settings for the Internet Protocol Version 4.
45. Use the supplied patch cable to plug the E10039 EKM-E into a router or switch.
46. Your Internet Service Provider (ISP) or Network Administrator is responsible for suppling routers or switches.
47. Please note: your ISP or your Network Administrator must configure the router or switch with Port 3000 TCP open.
NOTE: E-MonEnergy software requires Port No. 3000 as shown below.
Fig. 46.
Fig. 47.
Fig. 48.
27
EKM-E ETHER-MON KEY DE-211
31-00160—01