Chapter 8 Web Configuration; Login; Add Devices; Manually Add - HIKVISION DS-1100KI(B) User Manual

You can add devices, manage channels or configure basic parameters through the web interface of
the network keyboard. It is convenient to remotely configure and maintain the network keyboard.

8.1 Login

Before You Start
Ensure that the network keyboard is connected to the network and the IP address of the network
keyboard is obtained.
Steps
1. Open the browser, enter the IP address of the network keyboard (HTTPS://IP address) in the
address bar, and enter the login interface.
2. Enter user name and password.
3. Click Login.

8.2 Add Devices

8.2.1 Manually Add

When the network keyboard is used as the control center and you select the keyboard operation
mode, add the device first according to this section.
Steps
1. In Device Management interface, select to add Center Device or IPC/Network Dome.
2. Click Add, select to add devices by IP address or IP segment, and enter IP Address, Port, User
Name and Password, and select protocol type.
DS-1100KI(B) Network Keyboard User Manual

Chapter 8 Web Configuration

Figure 8-1 Login
48