Table of Contents
Advertisement
To pause the tape
÷ Press the 2 or 3 key to restart playback.
To w ind tape at high speed
To fast w ind in
direction |
÷ Press the 7 key to stop fast w inding.
Selection of reverse mode
Each press sw itches the modes as follow s.
1"""lit.... Both sides are played.
2Goes off.. Only one side is played back (re-
÷ Set the tape correctly as show n in the figure. Wrong tape
setting can cause trouble.
÷ Normal (TYPE I ), high (TYPE II ), or metal (TYPE IV ) tape
selection is set automatically.
÷ Remove tape slack before loading.
Downloaded from:
http://www.usersmanualguide.com/
8
1
¡
To fast w ind in
direction \
rev. mode
∏
(The tape stops after recording
onto both sides.)
corded), and then the tape stops.
To stop playback
÷ The tape direction lights red.
Selection of DOLBY NR
The Dolby NR system minimizes the hiss noise
heard w hen playing tape.
B
C
Each press sw itches the modes as follow s.
1 "B" is lit ... Dolby B NR is used.
2 "C" is lit ... Dolby C NR is used.
3 "B" and "C" not lit ... Dolby NR is not used.
÷ Select the Dolby NR mode according to the recording
condition of the tape.
Transport direction indicators
The 2 and 3 indicators indicate the current direc-
tion in w hich the tape advances w hen playback or
recording is started automatically by the easy op-
eration function, etc. This direction is the direction
stored in memory w hen the tape w as last stopped.
(To change the direction, press the key for the de-
sired playback direction, and then press the 7 key.)
Transport direction indicators
2
Hearing sound
R-SE9 T/ DP-SE9 / X-SE9 (En)
7
(Noise Reduction)
Dolby NR
3
23
Advertisement
Table of Contents
