Table of Contents
Advertisement
M uting the sound temporarily
M UTE
Remote control unit
÷ Press again to resume the original volume.
÷ This is also cancelled w hen the volume is adjusted.
Bass compensation
N.B.
The indication changes each time this key is
pressed.
1NB ON... The low range are compensated
2NB OFF... In the ON setting, the EX. BASS
When CD has been selected.
V O L
Downloaded from:
http://www.usersmanualguide.com/
(Remote control unit only)
Blinks
M UTE
(N.B.: Natural Bass circuit)
R-SE9T
according to the volume (effective
for low volumes).
function is turned off.
Setting to OFF returns the levels
of the low and high range
frequencies to the levels set w ith
the multi control knob.
R-SE9T
C D
Volume display
2 )
Listening through headphones
R-SE9T
1 Insert the headphone plug into the phones jack.
phones
Lights
÷ Headphones w ith a stereo mini plug can be connected.
÷ The sounds from all speakers are cut off.
N B
2 Adjust the volume.
AUTO POW ER SAVE function
When more than 30 minutes have elapsed after the
unit in the pow er-ON condition w as left untouched
w ithout performing recording or playback or after
the M UTE key of the remote control w as pressed,
this function sw itches the pow er off automatically.
This function can be activated or deactivated by the
follow ing operation.
Press w hen the pow er is OFF.
÷ The A.P.S. indicator lights up.
Each press sw itches the modes as follow s.
1APS ON..... Auto pow er save is used.
2APS OFF.... Auto pow er save is not used.
÷ In the TUNER mode, this feature functions only w hen
the volume is set to 0 or w hen the muting is set to ON.
R-SE9T
Pow er Sw itch Standby
When this system is in standby condition (time display
for the R-SE9T, STANDBY indication for DP-SE9, standby
indicator lit for X-SE9), a slight current flow s for memory
protection.
At this time also, the remote control can be used for
pow er ON.
Hearing sound
R-SE9 T/ DP-SE9 / X-SE9 (En)
volume
control
∞
∞
down
up
EX. BASS
19
Advertisement
Table of Contents
