Bmc Configuration Utility - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features
(15)
User Default Options Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > User Default Options from
the System Utilities, the User Default Options menu appears.
For details about the options, see the table below.
Option
Save User Defaults
Erase User Defaults
User Defaults
1.2.3

BMC Configuration Utility

When you select System Configuration > BMC Configuration Utility from the System Utilities, the BMC
Configuration Utility menu appears.
For details about the options, see the table below.
Option
Network Options
Advanced Network Options
User Management
Setting Options
Set to factory defaults
Reset BMC
About
122
Parameter
[No, Cancel]
Yes, Save
[No, Cancel]
Yes, erase the current settings.
(Display only)
Parameter
-
-
-
-
[No]
Yes
[No]
Yes
-
Express5800/R120h-1E, R120h-2E Maintenance Guide
Description
If you select "Yes, Save", you can save the settings in
the current "BIOS / Platform Configuration (RBSU)"
menu as user defaults.
User defaults are saved when you exit System Utility
by pressing the <F12> key.
However, settings under the "Secure Boot Settings"
menu are not saved.
When "Yes, erase the current settings." is selected,
the saved user default is erased.
Rebooting of the system is required for erasing.
Displays whether user default settings are enabled or
disabled.
[
Description
Select to enter the Network Options.
Select to enter the Advanced Network Options.
Manage BMC user account.
Manage BMC Option Setting.
BMC configuration will be set to the factory
default. BMC will be reset and this configuration
utility will not be available until next system
reboot.
BMC will be reset and this configuration utility will
not be available until next system reboot. BMC
remote console will be disconnected and BMC IP
address may be changed after reset.
Display BMC information.
[
1. System Utilities
]: Default setting
]: Default setting