NEC Express5800 Series Maintenance Manual page 106

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 2 Useful Features
(10)
Server Security Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security from the
System Utilities, the Server Security menu appears.
For details about the options, see the table below.
Option
Set Power On Password
Set Admin Password
Secure Boot Settings
TLS (HTTPS) Options
Trusted Platform Module
Options
Intel (R) TXT Support
One-Time Boot Menu (F11
Prompt)
EXPRESSBUILDER (F10
Prompt)
Processor AES-NI Support
Backup ROM Image
Authentication
106
Parameter
String of up to 31 alphanumeric
characters
String of up to 31 alphanumeric
characters
-
-
-
Enabled
[Disabled]
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
Enabled
[Disabled]
Tips
Do not set the password before OS installation.
If you forget your password, perform the password initialization and set the password
again according to the procedure in "Chapter 1 (7. Reset and Clear)".
Express5800/R120h-1E, R120h-2E Maintenance Guide
Description
When the server powers on, a prompt is displayed to
enter a password before continuing the boot process.
In the event of an ASR reboot, the Power-On Password
is bypassed, and the server boots normally.
Use this option to enter the administrator password to
protect the server configuration. When this option is
enabled, you are prompted for this password before
being allowed to modify the configuration.
Select this option to display the Secure Boot
Configuration menu. Use this menu to enable or
disable Secure Boot Mode, and to add or remove
certificates in the Secure Boot databases. Before
configuring Secure Boot, ensure that you selected the
UEFI Mode, and that the UEFI Optimized Boot option is
enabled (under the Boot Mode menu).
Select this option to display the TLS Certificate
management and other options menu.
Select this option to enter the Trusted Platform Module
Setup options.
Use this option to modify Intel TXT support.
Use this option to disable the POST One-Time Boot
F11 Prompt.
Use this option to enable or disable the
EXPRESSBUILDER functionality. When disabled, you
are prevented from entering the EXPRESSBUILDER
environment by pressing F10 during server boot. You
must set this option to enabled to use
EXPRESSBUILDER functionality.
Use this option to enable or disable the Advanced
Encryption Standard Instruction Set (AES-NI) in the
processor.
Use this option to enable cryptographic authentication
of the backup ROM image on startup. When this option
is disabled, only the primary image is authenticated on
each startup. Enable this option to also perform
cryptographic authentication of the backup ROM
image.
[
1. System Utilities
]: Default setting

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120h-1eExpress5800/r120h-2eExp336Exp337

Table of Contents