Motorola PTP 300 series User Manual page 93

Web Page Reference
The screen displays the receive power over the last three minutes. This will allow the installer
to slowly sweep the antenna during installation and monitor the variation in signal strength with
angular position. The screen automatically refreshes every three seconds.
The screen also displays the current state of the wireless link in two ways. First, the actual state
of the wireless link is written in the top left corner of the screen. The instantaneous receive power
bar also encodes the state of the wireless link using green to signify that the wireless link is up and
red for all other states.
For the more technically aware, the installation metric is simply the instantaneous receive power
in dBm + 110.
The PDA installation tool is accessed via a hidden URL http:// ip-address /pda.cgi. It should
be noted that this link is only available after the user has logged in as system administrator.
The large screen version of the graphical user interface is available as a submenu option of the
installation wizard.
93