Wincor Nixdorf Rs232 Mode A; Keyboard Country Layout - Honeywell Voyager 1450g Series User Manual

Wincor Nixdorf RS232 Mode A

Note: This interface is not supported by the Voyager 1450g2DHR.
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf RS232 Mode A terminal. This bar code sets
the baud rate to 9600 bps and the data format to 8 data bits, odd parity, 1 stop bit. The following prefixes are programmed for
each symbology:

Keyboard Country Layout

If your interface is USB Keyboard or Keyboard Wedge, your keyboard layout default is a US keyboard. To change this layout,
refer to the chart below for your keyboard country. Scan the appropriate bar code below to change the layout.
By default, national character replacements are used for the following characters: #$@[\]^'{|}~ See
Character Replacements on page A-7 to view the character replacements for each country.
Keyboard Countries
* United States
Azeri (Cyrillic)
Belarus
2 - 8
Symbology Prefix
Code 128 K
Code 93 L
Codabar N
UPC-A A0
UPC-E C
EAN-8 B
All other bar codes M
Wincor Nixdorf RS232 Mode A
Symbology
EAN-13
GS1-128
Interleaved 2 of 5
Plessey
Straight 2 of 5 IATA
GS1 DataBar
Settings
Prefix
A
K
I
O
H
E
ISO 2022/ISO 646
Albania
Azeri (Latin)