Table of Contents
Advertisement
User Manual of IR Network Speed Dome
information; you can click
network parameter panel on the right side, or click
network parameter panel.
Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of
the device will be displayed in the Modify Network Parameters panel on the
right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and
click
to save the changes.
Restore default password
Steps:
1. Contact our technical engineers to get the serial code.
Note:
Serial code is a series of characters combined by the start time and the serial
number of the device.
2. Input the code in the Serial code field and click
password.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to expand the device table and hide the
Figure A.1.2 Modify Network Parameters
104
to show the
to restore the default
www.cctvireland.ie
Advertisement
Table of Contents
