Table of Contents
Advertisement
Feature/Code
Activating the Distinctive
Ring feature
MBNM4NM3NM0N
Setting the ring pattern for fax
(Distinctive Ring feature)
MBNM4NM3NM1N
Setting auto reduction
feature
MBNM4NM3NM2N
Changing the fax activation
code
MBNM4NM3NM4N
Setting the memory reception
alert
MBNM4NM3NM7N
Setting friendly reception
MBNM4NM3NM8N
Selection
M0N "OFF" (default)
M1N "ON"
See page 68 for details.
M1N "A"
M2N "B"
M3N "C"
M4N "D"
M5N "B-D" (default)
See page 68 for details.
To receive a fax document that is longer than your recording paper.
M0N "OFF": Deactivates this feature.
M1N "ON" (default): The unit will fit received documents onto your recording
paper.
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
M0N "OFF" (default)
M1N "ON"
1. MMenuN A MBNM4NM3NM4N
2. Press M1N to select "ON". A MSetN
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN.
R The default code is "H#9".
4. MSetN A MMenuN
To alert you with a beeping sound when a received fax document is stored into
memory.
M0N "OFF": Deactivates this feature.
M1N "ON" (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 109 to page 111 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
R If documents are stored into memory due to activating the web fax preview
(feature #448 on page 66), the base unit will not beep. However, the base
unit will start to beep when the memory is nearly full.
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M0N "OFF": You have to press MStartN, and then M2N for fax reception using the
base unit. You have to press MMENUN (soft key), select "Fax start", and then
MSELECTN (soft key) for fax reception using the cordless handset (KX-MB2060
optional).
M1N "ON" (default): You do not have to press MStartN, and then M2N for fax
reception using the base unit. You do not have to press MMENUN (soft key),
select "Fax start", and then MSELECTN (soft key) for fax reception using the
cordless handset (KX-MB2060 optional).
11. Programmable Features
85
Advertisement
Table of Contents
