Figure 4-19: Mac Filtering; Figure 4-20: Url Blocking - Linksys AM300 User Manual

ADSL Modem
MAC Filter
This screen allows you to filter by MAC address. To filter by MAC address, enable MAC Address Control, then enter
up to 32 MAC addresses or copy the MAC addresses from the DHCP Client List drop down menu.
Control
• MAC Address Control. To filter by MAC address, click the Yes button, or to disable the feature, click the No
button. When MAC Address Control is enabled, only computers with a MAC address listed in the table are
granted access to the Internet.
Filter Table
• MAC Filtering Table. When MAC Address Control is enabled, you can enter up to 32 MAC addresses to be
allowed to access the network.
• DHCP Client List. You can copy the MAC address from the DHCP Client List drop down menu. Select the MAC
address from the DHCP Client List drop down menu, click the Copy to button, and select the number you want
to copy it to.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
URL Blocking
This screen allows the user to block access to certain web sites from a particular PC by entering either a full URL
address or just a keyword of the web site. If you want to remove all the URLs and Keywords from the list, click the
Clear All button.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Chapter 4: Configuring the ADSL Modem
The Security Tab

Figure 4-19: MAC Filtering

Figure 4-20: URL Blocking

20