Retaining / Restoring Options - *Ro; Soft Download Password - %P1, $Y; Remote Configuration - Motorola V.3600 User Manual

Retaining / Restoring Options — *RO
This option is used when the modem is shared by two or more DTEs.
When options are retained, the current configuration is not altered at
disconnect. With options restored, the modem returns to the previously
stored configuration on disconnect.
When options are restored at disconnect, the following commands
return OK but are not executed:
• *CNStore telephone number
• &ZStore telephone number
• &FRecall factory configuration
• &WStore current configuration
Command
*RO
*RO1
Soft Download Password — %P1, $Y
Select a numeric password to permit/inhibit software downloading via
flash memory if desired. The process is detailed in Appendix H.
Command
%P1=pw
%P1=D
%P1?
$Y

Remote Configuration

This mode of operation allows viewing or modifying the options of a
remote modem that supports Motorola or Motorola UDS remote
configuration. Remote configuration is performed using the front panel
LCD or, more commonly, AT commands from the local terminal.
Remote configuration is initiated by the local (master) modem through a
proprietary protocol, a security code, and an acknowledgment from the
remote (slave) unit to be modified. The security code is inserted and
provides protection from unauthorized entry. The modems are shipped
from the factory without a security code.
Operation
Retain options at disconnect
Restore options at disconnect
Operation
Set software download password to 0-99999999
Disable software download
Display software download password
Enable soft download flash
V.3600
AT Commands
5-41