Status Notifications; Warning Notifications - Sony Airpeak S1 Help Manual

15.
LINK button
Press to link the aircraft and the remote controller.
16.
BATTERY RELEASE levers
17.
Power status LED
Indicates the status of the aircraft.
LED color
Green
Cyan
Green, red, and yellow
18.
Battery level LEDs
Indicate the remaining battery level of the battery packs loaded in the aircraft.
LED indication Remaining battery level
All lit up Full
Three lit up Approx. 75%
Two lit up Approx. 50%
One lit up Approx. 25%
Blinking fast Low
Off None
19.
Flight status LEDs (Rear LEDs)
Indicate the status of the aircraft.

Status notifications

LED color
Green, yellow, and
red
Green
Green
Yellow
Blue
Blue
Cyan

Warning notifications

LED color LED indication
LED indication
Lit up
Lit up
Blinking alternately
LED indication Status of the aircraft
Blinking alternately The aircraft is starting up.
GNSS (Global Navigation Satellite System) signals are being used for
Blinking slowly
positioning.
Blinking twice
The Vision Positioning is being used for positioning.
repeatedly
Blinking slowly The aircraft is flying with [Flight mode] set to [Alt (Altitude)].
Blinking fast The brakes have been activated to avoid obstacles.
Blinking slowly The aircraft is performing automated flight.
Blinking twice The aircraft is waiting for the completion of linking with the remote
repeatedly controller.
Status of the aircraft
Status of the aircraft
Turned on
Receiving system software data.
Updating system software.
15