Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
ID label (see below). This information is required for us to provide proper tech support, and it helps us determine if updated documenta- tion is available for your machine. Manufacture Date Serial Number Model T32305 (Mfd. Since 08/20)
Hydraulic Control Lever Transport Handle Hydraulic Fluid Tank Hydraulic Electric Motor Control Valve Circuit ON Button Pressure Breaker Release Reset Button To reduce your risk of serious injury, read this entire manual BEFORE using machine. Model T32305 (Mfd. Since 08/20)
Remove to check fluid level and add/change hydraulic fluid. C. ON Button: When pushed and held, starts runs motor pressurize hydraulic fluid. ON button and hydraulic control lever must be held simultaneously to activate hydraulic ram. Model T32305 (Mfd. Since 08/20)
Splitting Force (Tonnage Rating) ...........................6 Tons Max. Log Dimensions (Length x Diameter) ......................20 x 10 in. Cycle Time ..............................24 Seconds Max. Stroke Length ............................15-3/8 in. Automatic Cylinder Return ............................Yes Splitter Wedge Height ..............................4 in. Model T32305 (Mfd. Since 08/20) Model T32305 Page 1 of 2...
Page 8
6-Ton Splitter Ram Pressure Two-Handed Operation Keeps Hands Clear of Action While Operating Carbon-Steel Splitter Wedge Steel Frame Built-In Heavy-Duty Wheels for Mobility Includes 4-Way Cross Wedge for Splitting Kindling Model T32305 (Mfd. Since 08/20) Page 2 of 2 Model T32305...
Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. Model T32305 (Mfd. Since 08/20)
Page 10
Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. Model T32305 (Mfd. Since 08/20)
If normal safety with caution and respect. Failure to do precautions are overlooked or ignored, so could result in serious personal injury, serious personal injury may occur. damage to equipment, or poor work results. Model T32305 (Mfd. Since 08/20)
Page 13
Two-prong outlets do not meet the grounding requirements for this machine. Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. -11- Model T32305 (Mfd. Since 08/20)
IMPORTANT: Save all packaging materials until you are completely satisfied with the machine and have resolved any issues between Grizzly or the shipping agent. You MUST have the original pack- aging to file a freight claim. It is also extremely helpful if you need to return your machine later.
Figure 4. Location of air bleed screw and Lifting & Moving transport handles. Assembly The wheels on the Model T32305 make it possible for one person to move the log splitter short distances; however, we suggest that you get assistance whenever lifting it.
If fluid is injected into any part of your body, it is a medical emergency and may, if not treated immedi- ately, result in severe infec- tion, permanent disability, or even death. -14- Model T32305 (Mfd. Since 08/20)
Read books/magazines or get formal training before beginning any proj- ects. Regardless of the content in this sec- Loose hair and cloth- tion, Grizzly Industrial will not be held liable ing could get caught in for accidents caused by lack of training. machinery cause serious personal injury.
If you do, you will damage the machine, void the warranty, and possibly severely injure or kill bystanders or yourself. Figure 6. Log correctly placed on log table. -16- Model T32305 (Mfd. Since 08/20)
Always use a wooden wedge to remove process with a second wedge until log is free. a stuck log. If log is still stuck, turn log splitter OFF and use a hammer and crow bar to remove stuck log. -17- Model T32305 (Mfd. Since 08/20)
T21272—Golden Pigskin Gloves T20692—Deluxe Soft Goatskin Gloves Installing unapproved accessories may Grizzly offers a wide selection of synthetic and cause machine to malfunction, resulting in leather gloves for all-day comfort in a variety of serious personal injury or machine damage.
Page 21
Platform size is 48" x 24". Maximum capacity 700 lbs. Figure 14. T22389 10" Bastard File. Figure 12. H0771 Folding Side Garden Wagon. www.grizzly.com 1-800-523-4777 order online at or call -19- Model T32305 (Mfd. Since 08/20)
Figure 15. Location of hydraulic ram track. Every 150 Hours of Use • Change hydraulic fluid. Cleaning For optimum performance from your log splitter, clean it with a brush after every use and wipe it down occasionally with a rag. -20- Model T32305 (Mfd. Since 08/20)
Fluid Figure 16) and wipe dipstick with clean rag. The hydraulic fluid level should be checked before each use of the Model T32305. Replace the fluid after every 150 hours of Hydraulic operation, if it smells burnt, or if it is contaminated Fluid Tank by water.
Fill tank with 3.6 quarts of hydraulic fluid and re-install plug. Wedge Too Dull Check hydraulic fluid level. IMPORTANT: Be sure to dispose of old hydraulic fluid according to federal, state, and fluid manufacturer's requirements. Wedge Just Right Figure 19. Wedge points. -22- Model T32305 (Mfd. Since 08/20)
1. Motor or component loose. 1. Replace missing bolts/nuts or tighten if loose. Use vibration or noisy thread-locking fluid if necessary. operation. 2. Motor fan rubbing on fan cover. 2. Fix/replace fan cover; replace loose/damaged fan. -23- Model T32305 (Mfd. Since 08/20)
Page 26
5. Hydraulic control valve seals worn/ 5. Replace hydraulic control valve and flush/service damaged. hydraulic system (Page 22). Hydraulic fluid 1. Hydraulic fluid old or contaminated with 1. Change hydraulic fluid (Page 22). burnt or has tan water. discoloration. -24- Model T32305 (Mfd. Since 08/20)
Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -25- Model T32305 (Mfd. Since 08/20)
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. Main 87 88 66 67 68 69...
Page 30
102-1 PT32305102-1 ELECTRICAL BOX COVER PT32305064 LOCK NUT M6-1 102-2 PT32305102-2 TAP SCREW M4 X 14 PT32305065 FRONT BRACKET 102-3 PT32305102-3 GASKET BUY PARTS ONLINE AT GRIZZLY.COM! -28- Model T32305 (Mfd. Since 08/20) Scan QR code to visit our Parts Store.
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. BUY PARTS ONLINE AT GRIZZLY.COM! -29- Model T32305 (Mfd.
This blood poison- ing could result in an agressive infection, amputation, or death. Cylinder Tank Control Valve Pressure Relief Valve Tank Pump Motor Tank -30- Model T32305 (Mfd. Since 08/20)
WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.