Description; Message Display - GE Multilin MM3 Motor Manager 3 Instruction Manual

GE Consumer & Industrial
Multilin
ACTUAL STORE
SETPOINT RESET
MESSAGE
RELAY A RELAY A
RUNNING
STOPPED RELAY B RELAY B
VALUE
AUX RELAY 1 AUX RELAY 1
TRIPPED
ALARM AUX RELAY 2 AUX RELAY 2 MANUAL
AUTO
STOP
START START START START
A A B B
3.1.1

Description

3.1.2 Message
Display
MM3 MOTOR MANAGER 3 – INSTRUCTION MANUAL
MM3 Motor Manager 3
Chapter 3: Hardware
Hardware
3.1 User interface
Once the MM3 has been wired and powered on, it is ready to be programmed for a specific
application. Local programming is done using the front panel keypad and the 40-character
alphanumeric display. Remote programming via the serial port is also possible using the
EnerVista MM3 Setup software.
A 40-character display communicates system information to the user. Trip and alarm
messages automatically override the currently-displayed message. If no key is pressed for
two minutes, a user-selected default messaging sequence will be displayed. If the motor is
currently stopped, the MOTOR STATUS
motor is started, the first user-selected message appears.
message will be the default message. Once the
3–1