Installing / Removing Battery Pack; Operation Caution; Service Information - Black & Decker LSW40 Instruction Manual

INSTALLING / REMOVING
BATTERY PACK
• TO INSTALL BATTERY PACK:
Insert battery pack into tool until an
audible click is heard as shown in figure
C. Make sure battery pack is fully seated
and fully latched into position.
• TO REMOVE BATTERY PACK:
Depress the battery release button (6)
in the back of the battery pack and
pull battery pack out of tool assembly as
shown in figure D.
C
D
OPERATION
CAUTION:
safety glasses. Wear a filter mask if the
operation is dusty. Use of gloves, long
pants and substantial footwear is
recommended. Keep long hair and loose
clothing away from openings and moving
parts. THIS SWEEPER IS FOR
HOUSEHOLD USE ONLY.
• Hold the sweeper with one hand as
shown in figure E and sweep from side to
side with the nozzle several inches above
the ground. Slowly advance keeping the
accumulated pile of debris in front of you.
E
7
Always wear
SWITCHING ON AND OFF
WARNING:
HANDS TO GRIP THE PRODUCT FIRMLY
WHEN SWITCHING ON.
CAUTION:
UNIT DISCHARGE AT SELF OR
BYSTANDERS.
• To switch the sweeper on, slide the on/off
switch forward as shown in figure F.
• To switch the sweeper off, slide the on/off
switch back as shown in figure G.
F
G
ACCESSORIES
• Recommended accessories for use with
your tool are available from your local
dealer or authorized service center. If you
need assistance regarding accessories,
please call: 1-800-544-6986.
WARNING:
accessory not recommended for use with this
tool could be hazardous.

SERVICE INFORMATION

All BLACK+DECKER Service Centers
are staffed with trained personnel to
provide customers with efficient and
reliable power tool service. Whether you
need technical advice, repair, or genuine
factory replacement parts, contact the
BLACK+DECKER location nearest you. To
find your local service location, call: 1-800-
544-6986 or visit www.blackanddecker.com
This Class B digital apparatus complies with
Canadian ICES-003.
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
USE BOTH
DO NOT POINT
The use of any
7