Table of Contents
Advertisement
.
GFK-2847
Chapter 1 Introduction
Chapter 1. Introduction
The QuickPanel+ operator interface is an all-in-one microcomputer designed for maximum
flexibility. The design, based on an advanced ARM core microprocessor, brings together a
high-resolution touch-screen operator interface with a variety of communications options. You
can connect to most industrial equipment through the QuickPanel+ communications ports.
The QuickPanel+ is equipped with several memory types to satisfy the most demanding
applications. A 512MB section of DRAM is split between the operating system, an object
store and application memory. Functioning as a virtual hard drive, a 256MB section of non-
volatile flash memory is divided between the operating system and persistent storage for
application programs. The retentive memory consists of 512KB of battery-backed SRAM for
data storage, protecting your valuable data during a power failure.
1.1 Specifications
General Specifications
1.1.1
Processor
Memory
Operating system
Display
Touch screen
Communications
Storage
Audio
Noise immunity
Input power
4
QuickPanel+ User's Manual–November 2013
RAM
ROM
SRAM
Type
Resolution
Backlight
Touch Panel Type
Multi-touch
Ethernet Port
Serial Port
USB, Host
USB, Device
Maximum Rated
Voltage
Rated Voltage
Power Consumption
Frame Ground
QuickPanel+ User's Manual–November 2013
Freescale i.MX535 (1GHz ARM Cortex A8)
DDR2 SDRAM 512MB
SLC NAND 256MB
512 KB (with Battery backup)
Microsoft Windows Embedded Compact 7
7" Widescreen TFT LCD
800(W) x 480(H) pixels WVGA
LED
Projected Capacitive
Two-point
1x 10/100BaseT (RJ-45)
1x RS-232 UART Port (5-Pin Connector)
Two USB2.0 (Type-A)
Max. Power (5V @ 0.5A)
One USB 2.0 (Mini Type-B)
One SD/SDHC Card Slot
One Mic In (mono) (3.5mm Jack
One Line Out (Stereo) (3.5mm Jack)
Noise voltage: 1500V p-p
Pulse Duration: 1µs, Rise time: 1ns
+30VDC
+24VDC ±20% (3-Pin Connector)
15W (max)
Frame GND is connected to Signal GND internally
7
GFK-2847
Hide quick links:
Advertisement
Table of Contents
