Basic Setup; Startup - GE QuickPanel+ IC754VSI12CTD User Manual

Figure 2. QuickPanel+ Package Contents

2.2 Basic Setup

Your QuickPanel+ is shipped ready for use after a few configuration steps. To power up, all
you need to do is connect a DC power supply using the supplied quick-connect plug.
Depending on your application, you may also want to connect and configure optional input
devices, communications ports and expansion adapters.
Figure 3. Basic Setup Diagram

2.3 Startup

You will need the following:
GFK-2847
Gasket, one (not shown, pre-installed)
Electrical Shock Hazard: To avoid personal injury or damage to
equipment, ensure that the DC supply is disconnected from power
and that the leads are not energized before attaching
the unit's power supply plug.
QuickPanel+ User's Manual–November 2013
Chapter 2. Getting Started
Warning
them to
11