Configuring Duplex Lan - NEC Express5800/R320g-M4 Maintenance Manual

Hide thumbs Also See for Express5800/R320g-M4:
Table of Contents

Advertisement

Chapter 2 Configuring and Upgrading the System

3.1.3 Configuring Duplex LAN

The following explains how to configure duplex/dual LAN.
(1)
Start Windows PowerShell .
1.
Select Start – Windows PowerShell.
2.
Enter the following command and change to the directory.
> cd 'C:\Program Files\ftsys\CustomerService\SupportTools\'
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
138
If configuring a duplex network, make sure that the CPU/IO module is set to
Important
duplex. If the CPU/IO module is in simplex status, the team properties of NIC
teaming cannot be opened.
Use script for LBFO teaming settings. The script may fail if start it before
completion of duplexing.
Make sure to configure the duplex network according to the following procedure
while the CPU/IO module is in duplex status.
Note
Because the configuration from the remote site may fail, you need to log on as an
Administrator or a member of Administrators group.
Before replacing the back panel of CPU I/O module, 1000BASE-T 2ch board set
(N8804-012), or 10GBASE-T 2ch board set (N8804-013), be sure to remove duplex
LAN, and create a team after the replacement.
See Chapter 2 (3.1.4 Removing Duplex LAN) for how to remove duplex LAN.
See Chapter 2 (3.1.3 Configuring Duplex LAN) for how to configure duplex LAN.
The screen images are subject to change because of the network driver version.
Substitute as appropriate when content has been modified.
3. Duplex LAN Configuration

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents