NEC Express5800/R320g-M4 Maintenance Manual page 124

Chapter 2 Configuring and Upgrading the System
7. Insert the disk to set dual configuration into the Slot 1 of PCI module 11.
If a hard disk drive is already mounted, this procedure is not necessary.
When a disk is inserted, a popup window asking for rebooting the system may be displayed, but there is no
need to reboot it. Select Restart Later and close the popup window.
8. Right-click the Slot 1 of the PCI module 11 from the left pane of RDR Utility, and then click Add Physical
Disk To RDR Virtual Disk.
9. Click OK.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
124
For a disk to be inserted, use a new or physically formatted disk which has the same
Important
capacity as the synchronization source. If such a disk is not used, disks are not
duplicated successfully.
As for physical format, see Chapter 3 (3.3 Physical Formatting of the Hard Disk
Drive).
1. Hard Disk Drive Operations