Chapter 1: System operation
Enabling a panel NAC
You can enable a disabled panel NAC. When you enable a panel
NAC:
•
The common Disable LED turns off (if there are no other
disabled panel NACs)
•
The message on the LCD display indicating the disabled NAC
disappears
•
The common Trouble LED turns off and the panel returns to
normal
•
The disabled points and active points counters on the LCD
display decrement
To enable a panel NAC:
1.
Press the Menu button.
2.
Choose Control.
3.
Enter your password (the minimum of a level one password is
required).
4.
Choose Enable/Disable.
5.
Choose Panel NAC.
6.
Select the NAC that you want to enable.
7.
Press Enter.
8.
Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
46
Reports
Test
Control
Program
⇩
Enter Password
0000
⇩
Control
Enable/Disable
Activate/Restore
⇩
Enable/Disable
Panel Event
Loop Event
Panel NAC
⇩
Panel NAC
1
NAC 1
EST iO64 and iO500 Technical Reference Manual
Enable<>