Advertisement

Quick Links

FFB51400ZM
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Summary of Contents for AEG FFB51400ZM

  • Page 1 FFB51400ZM User Manual Dishwasher USER MANUAL...
  • Page 2: Table Of Contents

    13. TECHNICAL INFORMATION................. 21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Juveniles and vulnerable people safety The juveniles aged under 8 years shall not use this •...
  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Obey the maximum number of 9 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Connect the mains plug to the mains • If the water inlet hose is damaged, socket only at the end of the immediately close the water tap and installation. Make sure that there is disconnect the mains plug from the access to the mains plug after the mains socket.
  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Worktop Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Salt container Air vent...
  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing phase operates. Drying phase.
  • Page 8: Programmes

    Indicator Description Delay (延迟启动) indicator. Door indicator. It comes on when the appliance door is open or is not cor- rectly closed. 5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel.
  • Page 9: Settings

    ENGLISH 5.1 Consumption values Water Energy Duration Programme (kWh) (min) 0.778 6 - 12 0.5 - 1.2 40 - 150 11 - 13 1.0 - 1.2 130 - 150 0.6 - 0.8 10 - 12 0.8 - 0.9 60 - 80 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
  • Page 10 Water hardness German de- French degrees mmol / l Clarke de- Water softener lev- grees (°dH) (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3...
  • Page 11: Options

    ENGLISH AirDry (空气对流干燥) is automatically – = rinse aid empty activated with all programmes excluding notification activated. (if applicable). – = rinse aid empty notification deactivated. To improve the drying performance refer 2. Press Start to change the setting. to the XtraDry (增强烘干) option or 3.
  • Page 12: Before First Use

    How to activate XtraDry (增强 Activating options can affect 烘干) the water and energy consumption as well as the Press Option (选项) until the indicator programme duration. is on. The display shows the updated 7.1 XtraDry (增强烘干) programme duration.
  • Page 13: Daily Use

    ENGLISH CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Fill the dispenser (A) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much 4.
  • Page 14 2. Press the on/off button to activate • 5 minutes after the completion of the the appliance. programme. Make sure that the appliance is in • After 5 minutes if the programme has programme selection mode. not started. • If the salt indicator is on, fill the Starting a programme salt container.
  • Page 15: Hints And Tips

    ENGLISH Press simultaneously Delay and Option If the door is opened for until the appliance is in programme more than 30 seconds selection mode. during the drying phase, the running programme ends. It Cancelling the programme does not happen if the door is opened by AirDry (空气对...
  • Page 16: Care And Cleaning

    10.3 What to do if you want to • Make sure that glasses do not touch other glasses. stop using multi-tablets • Put small items in the cutlery basket. • Put light items in the upper basket. Before you start to use separately...
  • Page 17 ENGLISH 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
  • Page 18: Troubleshooting

    11.2 Cleaning the spray arms • If you regularly use short duration programmes, these can leave Do not remove the spray arms. If the deposits of grease and limescale holes in the spray arms are clogged, inside the appliance. To prevent this,...
  • Page 19 ENGLISH Problem and alarm code Possible cause and solution The appliance does not fill • Make sure that the water tap is open. with water. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water The display shows authority.
  • Page 20 Refer to "Before first use", Authorised Service Centre. "Daily use", or "Hints and For alarm codes not described in the tips" for other possible table, contact an Authorised Service causes. Centre. Once you have checked the appliance, deactivate and activate the appliance.
  • Page 21: Technical Information

    ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to- gether.
  • Page 22 Capacity Place settings Power consumption Left-on mode (W) Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
  • Page 23 ENGLISH...
  • Page 24 www.aeg.com/shop...

Table of Contents