Specifications - Makita DP3002 Instruction Manual

ENGLISH (Original instructions)
1-1. Switch trigger
1-2. Lock lever
2-1. Reversing switch lever
3-1. Hook

SPECIFICATIONS

Model
Steel
Capacities
Wood
No load speed (min
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Model DP3003
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DP4001,DP4002,DP4003
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Explanation of general view
5-1. Side grip
5-2. Teeth
5-3. Protrusions
6-1. Sleeve
DP3002
10 mm
32 mm
-1
) 0 - 1,200
304 mm
2.4 kg
noise level determined
) : 81 dB (A)
pA
) : 92 dB (A)
WA
) : 82 dB (A)
pA
) : 93 dB (A)
WA
DP3003 DP4000
296 mm 304 mm
2.2 kg 2.5 kg
ENE032-1
Vibration
The vibration
determined according to EN60745:
ENF002-2
Model DP3003,DP4001,DP4002,DP4003
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
ENG905-1
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine:
Drill
Model No./ Type: DP3003,DP4001,DP4002,DP4003
are of series production and
3
6-2. Ring
7-1. Chuck key
8-1. Depth gauge
DP4001 DP4002
13 mm
38 mm
0 - 950
308 mm 304 mm
2.4 kg 2.7 kg
/II
total value (tri-axial
) : 2.5 m/s
h,D
2
DP4003
0 - 700
308 mm
2.5 kg
ENG900-1
vector sum)
2
or less
ENG901-1
ENH101-15