Electrical Safety - Makita DFJ216 Instruction Manual

Cordless fan jacket
Table of Contents

Advertisement

Electrical safety

Do not expose the jacket to rain or wet condi-
1.
tions. Keep water away from electrical parts.
Water entering the jacket may increase the risk of
an electric shock.
2.
Do not handle the cord and battery with wet or
greasy hands.
Do not use the fan jacket when the cord or
3.
plug is damaged.
4.
Do not abuse the cord. Do not use the cord
for carrying, pulling or unplugging the jacket.
Keep the cord away from heat, oil, and sharp
edges.
Do not leave any cord disconnected while the
5.
battery power is supplied. Small children may
put the live plug in their mouth and cause injury.
6.
Do not use the supplied cord with appliances
other than the fan unit.
7.
Do not insert nails, wires, or other items. into
the USB power supply port. Doing so may cause
short circuit, which can cause smoke or a fire.
8.
Do not connect the power source to the
USB port. The USB port is only intended for
charging lower voltage devices. Always place
the cover over the USB port when not charging
a lower voltage device. Otherwise there is risk of
fire.
Recharge only with the charger specified by
9.
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
10. Only use with specifically designated batter-
ies. Use of any other battery may create a risk
of injury and fire.
When battery pack is not in use, keep it away
11.
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
12. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
13. Do not use a battery pack or the fan unit that
is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
14. Do not expose a battery pack or the fan unit
to fire or excessive temperature. Exposure
to fire or temperature above 130 °C may cause
explosion.
15. Follow all charging instructions and do not
charge the battery pack or the fan unit outside
the temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
Important safety instructions for
battery cartridge
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5.
Do not short the battery cartridge:
(1)
Do not touch the terminals with any con-
ductive material.
Avoid storing battery cartridge in a con-
(2)
tainer with other metal objects such as
nails, coins, etc.
Do not expose battery cartridge to water
(3)
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6.
Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if
7.
it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.
Be careful not to drop or strike battery.
8.
9.
Do not use a damaged battery.
10. The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11.
When disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
specified by Makita. Installing the batteries to
non-compliant products may result in a fire, exces-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
4 ENGLISH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfj416

Table of Contents