Table of Contents
Advertisement
OK
10. Press the
SETUP " screen.
BACK
11. Press the
10.4.2 ATIS Channel Group
The GX1300E has the capability to turn on and off the ATIS feature for each
channel group.
1. Press the MENU key to display the menu.
2. Press the ▲ / ▼ keys to select " SETUP ", then
SELECT
press the
3. Press the ▲ / ▼ keys to select " ATIS SETUP ",
and then press the
cancel, press the
4. Press the ▲ / ▼ keys to select " ATIS GROUP ",
then press the
5. Press the ▲ / ▼ keys to select the desired
channel group, then press the
6. Press the ▲ / ▼ keys to select " OFF " or " ON ",
then press the
BACK
7. Press the
The TX output power is set to "1W" automatically on the following
channels of the Channel Group which turned on the ATIS feature.
CH 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, and 77
The "Scan" and "MULTI Watch" features are not available on the
channel group while the ATIS feature is turned on.
GX1300E
soft key to return to the " ATIS
soft key to exit the menu and return to radio operation.
soft key.
S E L E C T
BACK
soft key.)
SELECT
soft key.
SELECT
ENTER
soft key.
soft key to exit the menu and return to radio operation.
soft key. (To
soft key.
NOTE
ATIS CODE INPUT
STORED CODE
9366901230
OK
BACK
SELECT
SETUP
DSC SETUP
CHANNEL SETUP
ATIS SETUP
CONFIGURATION
BACK
SELECT
ATIS SETUP
ATIS CODE
ATIS GROUP
BACK
SELECT
ATIS GROUP
USA
OFF
INTL
OFF
CAN
OFF
BACK
SELECT
USA
OFF
ON
BACK
ENTER
Page 99
Advertisement
Table of Contents
