Cisco Catalyst PON Series Hardware Installation Manual page 44

Removing the Fan Module
• Antistatic mat
Procedure
Step 1
Use the Phillips head screwdriver and loosen the captive installation screw on the fan module of the OLT.
Figure 15: Detaching the Fan Module from the CGP-OLT-8T
1
Step 2 Grasp the fan module handle and slide the fan module half-way out of the bay. Gently move it from side to
side, if necessary, to unseat it from the OLT.
Step 3 Place your other hand underneath to support the bottom of the fan module and then remove the fan module
completely.
Cisco Catalyst PON Series Switches Hardware Installation Guide
40
Captive installation screw on the front of
the fan module
Removing and Replacing Field-Replaceable Units (FRUs)
2 Fan module handle on the front of the fan
module