Download Print this page

Instructions For Safe And Proper Use - Omega OG60WA Installation & Operating Instructions Manual

Advertisement

INSTRUCTIONS FOR SAFE AND PROPER USE

This manual is an integral part of the appliance and therefore MUST be kept in its
entirety and in an accessible place for the whole working life of the cooking hob.
We advise reading this manual and all the instructions therein before using the
cooking hob.
Also, keep the series of nozzles (injectors) supplied.
Installation MUST be carried out by an AUTHORISED PERSON in accordance with
the Regulation in force.
This appliance is intended for DOMESTIC use and conforms to current
Regulation in force.
This appliance has been built to carry out the following function: Cooking
and Heating-up of food.
All other uses are considered improper.
The Manufacturer declines all responsibility for improper use.
DO NOT leave the packing in the home environment.
Separate the various waste materials and take them to the nearest special garbage
collection centre.
Immediately after installation, carry out a brief inspection set of the cooking hob,
following the instruction below.
Should the appliance not function, disconnect it from the supply and call the
nearest technical assistance centre.
NEVER ATTEMPT TO REPAIR THE APPLIANCE.
Always check that the control knobs are in the position "ZERO" (OFF) when you
finish using the hob.
The identification plate, with technical data, serial number and marking is clearly
visible under the casing.
THE PLATE ON THE CASING MUST NOT BE REMOVED.
Before connecting the device, make sure that it has been regulated for the type of
gas that will feed it, checking the labelling under the casing.
2
INTRODUCTION

Hide quick links:

Advertisement

loading