Configure Sip Parameters - HIKVISION DS-K5604A-3XF Series User Manual

DS-K5604A-3XF Series Face Recognition Terminal User Manual
Period No.
Set the device installed period No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Floor No.
Set the device installed floor No.
Door Station No.
Set the device installed floor No.
Note
If you change the No., you should reboot the device.
Community No.
Set the device installed community No.
If set the device type as Outer Door Station, you can set the period No., outer door station No.,
and community No.
Period No.
Set the device installed period No.
Outer Door Station No.
If you select outer door station as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Set the device installed community No.

8.5.19 Configure SIP Parameters

Set the device's IP address and the SIP server's IP address. After setting the parameters, you can
communicate among the access control device, door station, indoor station, main station, and the
platform.
Note
Only the access control device and other devices or systems (such as door station, indoor station,
main station, platform) are in the same IP segment, the two-way audio can be performed.
75